 |
Annex to the Accreditation Certificate
|
LK-008 |
|
Issued on
|
February 23th, 2010 | |
|
Replaces Annex dated
|
March 11th, 2009 | |
|
Information on current accreditation status is available at:
|
www.sa.gov.si |
|
In lab
|
|
Measured quantity
|
Range
|
Best measuring capability
BMC (k=2)* |
Notes
|
| 3 |
| TIME AND FREQUENCY |
| 3.2.3 |
| Tachometers |
| Tachometers |
| 10 to 70 km/h | 0,09 km/h | Method of comparison In laboratory and on-site |
| 4 |
| DIMENSIONAL QUANTITIES |
| 4.1 |
| Length |
| 4.1.2 |
| Length measuring devices |
| Gauge block |
0,5 mm to 10 mm
above 10 mm to 125 mm
above 125 mm to 1000 mm
|
70 nm 60 nm + 1· 10-6·L 100 nm + 1,6·10-6·L |
Method of comparison | |
| Dial gauges | 0 mm to 100 mm | 0,4 μm + 2·10-5·L | In laboratory and on-site. On-site calibration only with load |
|
| Tire depth gauges | 0 mm to 100 mm | 0,03 mm | In laboratory and on-site | |
| Electronic probes | 0 mm to 100 mm | 0,4 μm + 2·10-5·L | Measuring area: < 100 mm x 100 mm |
|
| Thickness gauges | 0 mm to 1000 mm | 0,2 μm + 6·10-6·L | Measuring area: < 100 mm x 100 mm |
|
| Gap gauges | 0 mm to 1000 mm | 1,25 μm + 5,5·10-6·L | Measuring area: < 100 mm x 100 mm |
| 4.1.3 |
| Line measures |
| Rulers | 0 mm to 4000 mm | 50 μm + 3·10-6·L | ||
| Tape measures | 0 mm to 4000 mm | 50 μm + 3·10-6·L |
| 4.1.4 |
| Length measuring devices |
| Two point micrometers (external and internal) | 0 mm to 2000 mm | 1,5 μm + 5·10-6·L | ||
| Vernier calliper gauges | 0 mm to 2000 mm | 7,5 μm + 8·10-6·L |
| 4.1.5 |
| Diameter |
| Three point micrometers | 0 mm to 300 mm | 1,5 μm + 5·10-6·L | ||
| Ring gauges | 0 mm to 300 mm | 1,25 μm + 5,5·10-6·L |
| External diameter |
| Plug gauges | 0 mm to 300 mm | 0,2 μm + 6·10-6·L |
| 4.1.9 |
| Thread quantities |
| Screw ring gauges |
| Medium diameter | 3 mm to 300 mm | α=30°; 5 μm + 5·10-5·L α=55°; 3 μm + 7,5·10-6·L α=60°; 3,5 μm + 6·10-6·L |
Rate in the range 0,35 mm to 6mm α= thread angle (according to EURAMET/cg.10/v.01, method 1a) |
| Navojni trni |
| Medium diameter | 3 mm to 300 mm | α=30°; 5 μm + 5·10-5·L α=55°; 3 μm + 7,5·10-6·L α=60°; 3,5 μm + 6·10-6·L |
Rate in the range 0,35 mm to 6mm α= thread angle (according to EURAMET/cg.10/v.01, method 1a) |
| 4.2 |
| Angle |
| Protractor | 0° to 360° | 0,1° | Method of comparison |
| 5 |
| MECHANICAL QUANTITIES |
| 5.1 |
| Force |
| Force transducers |
| > 1 N to 10 N 10 N to 100 N 100 N to 200 N 200 N to 400 N 400 N to 600 N 600 N to 1000 N 1000 N to 1500 N 1500 N to 2000 N 2000 N to 2500 N 2500 N to 5000 N |
0,011 N 0,11 N 0,11 N 0,11 N 0,12 N 0,13 N 1,1 N 1,1 N 1,2 N 3,5 N |
Method of comparison. In laboratory and on-site |
| 5.2 |
| Conventional mass |
| Etalon weights |
| 1 mg 2 mg 5 mg 10 mg 20 mg 50 mg 100 mg 200 mg 500 mg 1 g 2 g 5 g 10 g 20 g 50 g 100 g 200 g 500 g 1 kg 2 kg 5 kg 10 kg 20 kg 50 kg |
0,002 mg 0,002 mg 0,002 mg 0,002 mg 0,003 mg 0,004 mg 0,005 mg 0,006 mg 0,008 mg 0,010 mg 0,012 mg 0,015 mg 0,020 mg 0,025 mg 0,030 mg 0,05 mg 0,10 mg 0,25 mg 1,5 mg 3,0 mg 7,5 mg 15 mg 30 mg 250 mg |
| Objects of other optional masses |
| to 0,5 g 0,5 g to 5,1 g 5,1g to 50 g 50 g to 205 g 205 g to 2 kg 2 kg to 5 kg 5 kg to 10,1 kg 10,1 kg to 25 kg 25 kg to 40 kg 40 kg to 64,1 kg |
0,01 mg 0,03 mg 0,05 mg 0,1 mg 3,0 mg 5,0 mg 7,0 mg 25 mg 80 mg 120 mg |
| 5.3 |
| Scales |
| Non-automatic scales |
| to 5 mg 5 mg to 10 mg 10 mg to 20 mg 20 mg to 50 mg 50 mg to 100 mg 100 mg to 200 mg 200 mg to 500 mg 0,5 g to 1 g 1 g to 2 g 2 g to 5 g 5 g to 10 g 10 g to 20 g 20 g to 50 g 50 g to 600 g 600 g to 25 kg 25 kg to 100 kg 100 kg to 600 kg |
0,0013 mg 0,0015 mg 0,0016 mg 0,0020 mg 0,0024 mg 0,0030 mg 0,0039 mg 0,0047 mg 0,0060 mg 0,0078 mg 0,011 mg 0,014 mg 0,018 mg m·(3,5·10-7) m·(8,0·10-7) m·(2,5·10-6) m·(3,0·10-6) |
m = weight |
| 5.4 |
| Pressure |
| Depression |
| - 0,9 bar to 0 bar | 0,085 mbar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
| Overpressure |
| 0 mmHg to 300 mmHg (0 kPa to 40 kPa) |
0,064 mmHg 8,5 Pa |
Medium: gas Measuring instruments: blood pressure manometers |
||
| 0 bar to 1 bar | 0,085 mbar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical |
||
| 1 bar to 35 bar | 4 mbar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical, tire pressure gauges for motor vehicles |
||
| 35 bar to 250 bar | 0,3 bar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical |
||
| 250 bar to 600 bar | 1,7 bar | Medium: fluid; Measuring instruments: mechanical, electro-mechanical |
| Absolute pressure |
| 0,1 bar to 2 bar | 0,17 mbar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
| Evaluation of chambers |
| 0,1 bar to 5 bar | 0,15 bar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
| 5.6 |
| Torque |
| Torque wrenches |
| to 20 Nm 20 Nm to 60 Nm 60 Nm to 1000 Nm 1000 Nm to 2000 Nm 3000 Nm to 3000 Nm |
1,2 % 1,0 % 0,7 % 0,5 % 0,3 % |
In laboratory and on-site |
| 5.7 |
| Acceleration |
| Measuring devices for acceleration and deceleration |
| 0 ms-2 to 10 ms-2 | 0,03 ms-2 | Method of comparison |
| 6 |
| ACOUSTICAL QUANTITIES |
| 6.1 |
| Sound Pressure level |
| Sound level meters 94 dB |
| 31,5 Hz to 12,5 kHz | 0,2 dB |
| Acoustic calibrators 94 dB |
| 31,5 Hz to 8 kHz 8 kHz to 12,5 kHz |
0,2 dB 0,25 dB |
| 6.1.3 |
| Microphone correction factor |
| 250 Hz | 0,2 dB | At 94 dB |
| Piston-phone 124 dB |
| 250 Hz | 0,08 dB |
| 6.1.5 |
| Acoustical calibration 94 dB |
| 1000 Hz | 0,09 dB |
| Acoustical calibration 94 dB– 114 dB step |
| 1000 Hz | 0,03 dB |
| Distortion at 94 dB, 124 dB |
| 31,5 Hz to 4 kHz | 0,25 d % | Distortion analyser |
| 6.2 |
| Transducers of sound level pressure |
| Electrical part of sound level meters |
| (40 to 134) dB (134 To 154) dB |
31,5 Hz to 12,5 kHz 31,5 Hz to 200 Hz |
0,1 dB 0,6 dB |
0dB corresponds to 1μV BMC is valid for instruments, whose microphone has all necessary characteristics | |
| (134 to 154) dB (134 to 154) dB |
200 Hz to 4 kHz 4 kHz to 20 kHz |
0,2 dB 0,6 dB |
||
| 7 |
| FLUID QUANTITIES |
| 7.4 |
| Volume of liquids |
| Pipettes (single-channel), dispensers and burettes |
| to 0,5 µl 0,5 µl to 2 µl 2 µl to 10 µl 10 µl to 20 µl 20 µl to 50 µl 50 µl to 100 µl 100 µl to 200 µl 200 µl to 500 µl 500 µl to 1000 µl 1 ml to 2 ml 2 ml to 5 ml 5 ml to 10 ml 10 ml to 20 ml 20 ml to 50 ml 50 ml to 100 ml 100 ml to 200 ml |
0,007 µl 0,010 µl 0,013 µl 0,014 µl 0,018 µl 0,055 µl 0,077 µl 0,15 µl 0,32 µl 0,65 µl 1,45 µl 3,10 µl 6,20 µl 14,3 µl 30,9 µl 61,7 µl |
| Pipettes (multi-channel) |
| to 5 µl 5 µl to 10 µl 10 µl to 20 µl 20 µl to 50 µl 50 µl to 100 µl 100 µl to 200 µl 200 µl to 500 µl 500 µl to 1000 µl 1000 µl to 2000 µl |
0,036 µl 0,037 µl 0,040 µl 0,054 µl 0,09 µl 0,17 µl 0,40 µl 0,80 µl 1,61 µl |
| Glass graduated and bulb pipettes, burettes and bottles for measuring density |
| to 2 ml 2 ml to 5 ml 5 ml to 10 ml 10 ml to 20 ml 20 ml to 25 ml 25 ml to 50 ml 50 ml to 200 ml 200 ml to 500 ml 500 ml to 1000 ml 1000 ml to 2000 ml |
1 µl 2 µl 4 µl 8 µl 10 µl 20 µl 40 µl 80 µl 110 µl 230 µl |
| Measuring cylinders and bottles |
| to 20 ml 20 ml to 50 ml 50 ml to 100 ml 100 ml to 200 ml 200 ml to 500 ml 500 ml to 1000 ml 1000 ml to 2000 ml |
0,016 ml 0,02 ml 0,03 ml 0,08 ml 0,3 ml 0,4 ml 0,6 ml |
| Volume containers |
| to 2 l 2 l to 5 l 5 l to 10 l 10 l to 25 l 25 l to 50 l 50 l to 100 l 100 l to 350 l |
1,9 ml 3,3 ml 3,8 ml 4,1 ml 12 ml 47 ml 73 ml |
| Volumetric dosing systems |
| to 20 ml 20 ml to 100 ml 100 ml to 2000 ml 2 l to 5 l 5 l to 10 l 10 l to 20 l 20 l to 50 l |
0,004 ml 0,009 ml 1,0 ml 1,1 ml 1,2 ml 5,2 ml 6,0 ml |
| 8 |
| OPTICAL QUANTITIES |
| 8.3 |
| Optical systems’ properties |
| Lumitesters |
| 0 % to 5 % | 0,07 % | Method of comparison In laboratory and on-site |
| 10 |
| TEMPERATURE, HUMIDITY AND THERMO-PHYSICAL PROPERTIES |
| 10.3 |
| Liquid thermometers |
| - 40 °C to 20 °C 20 °C to 150 °C 150 °C to 280 °C |
0,04 °C 0,03 °C 0,05 °C |
Method of comparison |
| 10.3.1 |
| Thermometers with display |
| - 40 °C to 20 °C 20 °C to 150 °C 150 °C to 280 °C 280 °C to 400 °C |
0,04 °C 0,03 °C 0,05 °C 0,25 °C |
Method of comparison |
| 10.5 |
| Humidity |
| 10.5.2 |
| Relative humidity measuring devices |
| 66 % to 95 % 34 % to 95 % 30 % to 95 % 19 % to 95 % 11 % to 95 % 10 % to 95 % |
3,0 % | 10 °C to 20 °C 20 °C to 22 °C 22 °C to 30 °C 30 °C to 40 °C 40 °C to 50 °C 50 °C to 60 °C |
| 10.5.4 |
| Evaluation of temperature regulated chambers |
| Temperature calibration baths |
| - 70 °C to 40 °C - 40 °C to 0 °C 0 °C to 20 °C 20 °C to 100 °C 100 °C to 150 °C 150 °C to 200 °C 200 °C to 250 °C 250 °C to 300 °C |
0,048 °C 0,042 °C 0,036 °C 0,028 °C 0,033 °C 0,036 °C 0,040 °C 0,042 °C |
In laboratory and on-site |
| Climate chambers: Stabilizers, dryers, vacuum dryers, thermostatic chambers with water-cooling, autoclaves, temperature chambers and rooms, refrigerators and freezers, hot baths |
| |
|
- 40 °C to 280 °C | 0,13 °C | In laboratory and on site |
| 66 % to 95 % 34 % to 95 % 30 % to 95 % 19 % to 95 % 11 % to 95 % 10 % to 95 % |
5,0 % | 10 °C do 20 °C 20 °C do 22 °C 22 °C do 30 °C 30 °C do 40 °C 40 °C do 50 °C 50 °C do 60 °C |
||
| 11 |
| CHEMICAL ANALYSIS; REFERENCE MATERIALS |
| 11.3 |
| pH measuring equipment |
| 0 pH to 14 pH -1999 mV to 1999 mV |
0,009 pH 0,30 mV |
Calibration of measures with BNC conectors and inner impedance of 100Ω/1000MΩ - with simulation, without probe. In lab and on-site |
| On site |
|
Measured quantity
|
Range
|
Best measuring capability
BMC (k=2)* |
Notes
|
| 5 |
| MECHANICAL QUANTITIES |
| 5.3 |
| Scales |
| Non-automatic scales |
| to 0,005 g 0,005 g to 0,02 g 0,02 g to 0,05 g 0,02 g to 0,1 g 0,1 g to 0,2 g 0,2 g to 0,5 g 0,5 g to 1 g 1 g to 2 g 2 g to 5 g 5 g to 10 g 10 g to 20 g 20 g to 50 g 50 g to 100 g 100 g to 200 g 200 g to 25 kg 25 kg to 100 kg 100 kg to 600 kg 600 kg to 6000 kg 6 t to 37,5 t 37,5 t to 60 t 60 t to 75 t 75 t to 100 t |
0,004 mg 0,005 mg 0,006 mg 0,008 mg 0,009 mg 0,012 mg 0,015 mg 0,019 mg 0,024 mg 0,030 mg 0,039 mg 0,051 mg 0,088 mg 0,16 mg m·(8,0·10-7) m·(2,5·10-6) m·(3,0·10-6) m·(1,5·10-4) m·(2,5·10-4) m·(3,5·10-4) m·(4,0·10-4) m·(5,0·10-4) |
m = weight | ||
| 5.2 |
| Conventional mass |
| Etalon weights |
| 0,1 g 0,2 g 0,5 g 1 g 2 g 5 g 10 g 20 g 50 g 100 g 200 g 500 g 1 kg 2 kg 5 kg 10 kg 20 kg 500 kg |
0,15 mg 0,20 mg 0,25 mg 0,3 mg 0,4 mg 0,5 mg 0,6 mg 0,8 mg 1,0 mg 1,5 mg 3,0 mg 7,5 mg 15 mg 30 mg 75 mg 150 mg 300 mg 15 g |
|||
| Objects of other optional masses |
| to 1 g 1 g to 5 g 5 g to 20 g 20 g to 50 g 50 g to 100 g 100 g to 205 g 205 g to 500 g 500 g to 1000 g 1000 g to 2100 g 2,1 kg to 5 kg 5 kg to 10 kg 10 kg to 20 kg 20 kg to 32 kg 32 kg to 400 kg |
1 mg 2 mg 3 mg 5 mg 6 mg 8 mg 15 mg 25 mg 50 mg 0,25 g 0,30 g 0,45 g 0,65 g 28 g |
|||
| 5.4 |
| Pressure |
| Depression |
| - 0,9 bar to 0 bar | 0,085 mbar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
||
| Overpressure |
| 0 mmHg to 300 mmHg (0 kPa to 40 kPa) |
0,064 mmHg 8,5 Pa |
Medium: gas Measuring instruments: blood pressure manometers |
||
| 0 bar to 1 bar | 0,085 mbar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical |
||
| 1 bar to 35 bar | 4 mbar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical, tire pressure gauges for motor vehicles |
||
| 35 bar to 250 bar | 0,3 bar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical |
||
| 250 bar to 600 bar | 1,7 bar | Medium: fluid; Measuring instruments: mechanical, electro-mechanicali |
| Absolute pressure |
| 0,1 bar to 2 bar | 0,17 bar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
| Evaluation of chambers |
| 0,1 bar to 5 bar | 0,15 bar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
| 7 |
| FLUID QUANTITIES |
| 7.4 |
| Volume of liquids |
| 7.4.1 |
| Volumetric dosing systems |
| to 5 ml 5 ml to 10 ml 10 ml to 20 ml 20 ml to 50 ml 50 ml to 100 ml 100 ml to 200 ml 200 ml to 500 ml 500 ml to 1000 ml 1000 ml to 5000 ml 5 l to 30 l 30 l to 100 l 100 l to 200 l 200 l to 300 l 300 l to 400 l 400 l to 500 l |
0,02 ml 0,03 ml 0,04 ml 0,08 ml 0,2 ml 0,4 ml 0,8 ml 1,6 ml 3,1 ml 0,06 l 0,4 l 0,5 l 0,6 l 0,7 l 0,8 l |
| 10 |
| TEMPERATURE, HUMIDITY AND THERMO-PHYSICAL PROPERTIES |
| 10.3 |
| Thermometers with display |
| 10.5.4 |
| Thermometers with display |
| - 30 °C to 100 °C 100 °C to 140 °C 140 °C to 200 °C 200 °C to 300 °C 300 °C to 400 °C |
0,05 °C 0,08 °C 0,15 °C 0,20 °C 0,25 °C |
Method of comparison |
